Nissan Consult Cable

Discussion in 'DIY Zone - The Techincal Era' started by Codename.47, Jun 4, 2012.

  1. Codename.47

    Codename.47 Guest

    This super diagnostic interface is compatible with Nissan Vehicles with 14 Pin DLC socket
    This tool can save TIME and MONEY on garage repair bills, Know what the fault is before you take it in, or even fix yourself!!

    - Interface fitting for 14pin Consult Port of Nissan vehicles.
    - Heavy & robust casing for rough service use
    - Connects to PC via RS232
    - Powered from car battery over 14pin Consult Port of Nissan vehicles.
    - LED to control power and clock function

    What can you do with this interface?
    - Monitor and Log dozens of realtime parameters
    -Check and clear engine fault codes before going to an expensive auto shop
    - Adjust the timing and idle
    - Power balance testing
    - Reset the self-learn codes
    - Control idle air valves, relays (AC, fans, etc), timing
    - Diagnose customer vehicles on-site
    - Speed up troubleshooting of electronically monitored components

    Available software working with this Interface:
    (Note that some software is available as shareware, some may require to be purchased)
    DDLreader: DDLreader v.15c / DDLreader v.16c
    SRTalk v.1.0
    ZCSetup v.2.0
    ZTalk v.1.1
    Nissan Data Scan v.1.4
    Nissan Data Scan v.1.51

    It works on all Nissan cars that have the grey 14pin Consult connector
    (you'll usually find it near the fusebox, this normally ranges for cars from year 1989 to 2000) .
    Models include: 300ZX, Z32, Maxima, 240SX, S13, S14, Micra, Primera, Almera, Skyline, SR20DE, SR20DET, RB20, Altima, Fairlady. etc etc
    (Any others with 14 pin DLC socket)

    Attached Files:

  2. Codename.47

    Codename.47 Guest

    I bought it yesterday so will post the stats soon

Share This Page