MAOH Mazda RX7 Source:Speedhunters.com Mods: -the stock twin turbo set up remained. -Boost was slightly increased and to boost cooling efficiency, the space in front of the engine was taken up -by the V-mount set up, where the massive intecooler sits horizontally and the radiator underneath it at a 45º angle -Carbon fiber shrouding helps direct air through the core and out via the openings on the hood -RE-Amemiya titanium exhaust -With an Apex Power FC handling engine management this 13B develops 400 HP and 340 lb/ft with almost no lag in the way the power comes. -An RE-Amemiya LSD helps juggle drive between the rear wheels and the single plate clutch, again from Amemiya, is enough to handle the engine's performance -car wears the aggressive Super GReddy III widebody conversion, replacing most of the body panels with custom shaped FRP items -The pop-up headlights are replaced with fixed powerful IPF HID projectors and sit recessed in the all new front bumper -Canards and a functional front lip spoiler help keep the front end of the car glued to the road at speed. -The integrated overfenders help pump the stance of the car and that side skirt treatment is what ties the whole conversion together. -The rear end is drastically altered with a short overhang, custom LED lights and a carbon fiber rear hatch, which like the hood up front helps shave off considerable weight. -The width of the high set rear spoiler has been kept within the dimensions of the car so it can remain street legal. -Enkei, 17-inch by 9.5J GTC01s, shod in 255/40R17 Advan Neova AD08 tires.-Brembo F50 calipers join Project µ 2-piece discs to boost braking power at the front while the stock calipers remain at the rear but are mated to Project µ discs.